Don't be mistaken, refinishing a hardwood floor is one remodeling project that takes a lot of hard work. Yet intrepid DIY-ers can still accomplish the task with a high degree of success--provided they arm themselves with a few key tips before getting underway. If you have plans to refinish a hardwood floor in your home, business, or commercial property, read on. This article will present three tips to help make the process a success.

Use a random orbital sander.

The first phase of a refinishing job involves sanding the floor down to bare wood. Professionals commonly accomplish this task using a large floor drum sander. While this is undoubtedly the fastest way to sand a floor, it also requires the greatest amount of skill. Unless you have the requisite experience, you may end up with a floor marred by uneven or damaged floors.

Random orbital sanders are a much safer--and simpler--choice for the amateur. These handheld tools work by simultaneously moving their sanding disk in both a circle and an elliptical pattern. For one thing, this helps to prevent unsightly swirl marks. For another, unlike regular orbital sanders, it means you don't have to worry about sanding along the grain of the wood. As long as you keep the sander level, you should come out with great results.

Ensure even staining by applying a sealer coat.

Sealer coats aren't a mandatory part of refinishing a floor. Yet they are well worth the effort if you are planning on staining your floor. That's because floors--especially those made of soft woods--don't always accept stain evenly. A coat of sealer, however, will help to minimize blotching and ensure consistent stain coverage.

Sealers work by filling in pores in the wood, thus creating a more even surface for the stain. Before applying a sealer, double check that it is compatible with the stain you'll be applying. The best way to ensure proper results is to use a seal and a stain made by the same manufacturer. The sealer should be allowed to dry for several hours after application, and then sanded lightly with a 220 grit sandpaper.

Use a foam roller to apply polyurethane.

Professionals often prefer to apply their topcoat of polyurethane using a so-called lambswool applicator. To use this tool effectively, however, requires a good deal of skill. Amateurs often end up with a layer of polyurethane that is much too thick. More consistent results can be obtained by utilizing a foam roller instead. Contact a business, such as Matrix Construction Ltd does commercial remodeling, for more information.   

Share